Light trapping problems

[Dynastes TItyus hunter]

I recently wanted to put a light trap up but I saw that my wires need replacing. How do you connect a mogul socket to a ballast port? 

 

[Dynastes TItyus hunter]

Basically connecting this https://www.amazon.com/gp/product/B00RDTH13A/ref=ox_sc_act_title_3?smid=A2PQGFJXAT8J9K&psc=1

to this https://www.amazon.com/gp/product/B0036ZA9AC/ref=ewc_pr_img_1?smid=ATVPDKIKX0DER&psc=1

 

[JKim]

You cut off female side.

connect black to black,

white to white,

Loop the green, and tape it to itself.



Once you cut it, it will look this way.

 

[Dynastes TItyus hunter]

Real thanks. 

 

[Dynastes TItyus hunter]

So should I just make a nub with the green? Using electrical tape. 

 

[Dynastes TItyus hunter]

And also I see that in picture four that there are 4 cords inside. https://www.amazon.com/gp/product/B00RDTH13A/ref=ox_sc_act_title_3?smid=A2PQGFJXAT8J9K&psc=1 

It might be wrong though. 

 

[Dynastes TItyus hunter]

BUMP

 

[JKim]

I don't get notification if you don't quote my post... Even if you say bump, I don't get notification..haha
I don't know why there are four cables, but it should be only three as neutral, ground, positive.

 

[kevink]

electricity is easier than you might think- white is always neutral, black is hot, other colors may be grounds, if you don't need a wire, put on a wire nut and tape it off.

I'm  self taught handyman, it looks overwhelming at first, but it's cake once you get into it.

 

[JKim]

it looks overwhelming at first, but it's cake once you get into it.

I am so agree with you!